Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Inglewood, CA
Chimney repair in Inglewood usually means fixing what decades of mild weather and occasional use left behind: cracked crowns, missing spark-arrestor caps, spalled mortar joints, and clay tile that finally gave out. We’re Chimney Sweep Carson, and we’ve served Inglewood since 2014. Most of what we see here are pre-war and mid-century fireplaces that were built for ambiance, not heat, sitting on chimneys that weren’t built for heavy wear. That makes repair work here less about creosote and more about water, birds, and age. Call (833) 593-4907 when you need someone who actually understands Inglewood chimneys.
Why Inglewood Homes Are Different
Inglewood’s housing stock is dominated by 1920s through 1950s builds: Spanish-revival, craftsman, and post-war tract bungalows with original brick-and-mortar fireplaces. South of Century Boulevard you’ll find more mid-century stucco, but the pattern holds. These chimneys are old enough that many are unlined or clay-tile lined, and age shows up as spalling mortar, cracked crowns, and flashing that doesn’t seal the way it used to.
The climate changes what we actually do on these jobs. Inglewood’s marine-influenced air keeps creosote loads low because fireplaces get light, occasional use, not heavy winter burn. But long idle periods create a different problem. Debris accumulates. Birds find their way in through missing caps. Moisture sits inside the flue during the dry season and does structural damage nobody sees until the next sweep or inspection. In the 90302 and 90303 neighborhoods around the Forum, we regularly open up fireplaces that haven’t been burned in years and find nests, water-damaged flue tile, and crowns that already failed.
Roof pitch matters more in Inglewood than most people expect. The older craftsman and Spanish-revival homes near the 90301 core often have steep, tile or shake roofs where access is genuinely difficult. Flashing condition becomes the real question. A chimney that’s structurally fine can still leak at the roofline because the flashing has been working loose for twenty years.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Inglewood Services
Inglewood homeowners typically reach out to us for two reasons: a chimney that hasn’t been cleaned or inspected in years, or a dryer vent nobody has thought about since the house was purchased. Both are fire-safety issues. Both benefit from a company that does only chimney and venting work.
Chimney Sweep in Inglewood
A chimney sweep in Inglewood is often a light-use sweep on a fireplace that has sat idle since last winter, but that doesn’t mean we cut corners. Inglewood’s dry season brings debris, bird activity, and hidden moisture into flues, which means the sweep should always include a close look at the crown, cap, and flue tile, not just the brush work. Homes in the 90304 and 90305 neighborhoods frequently show nests and blocked flues on fireplaces that look fine from the living room. See Chimney Sweep in Inglewood for the full rundown of how we handle these jobs.
Dryer Vent Cleaning in Inglewood
Dryer vents are the chimney most Inglewood homeowners forget. Lint builds up over years, restricted airflow raises the dryer’s operating temperature, and the NFPA has documented dryer vent fires as a leading cause of home fires nationwide. In older Inglewood homes, vents often run long, hidden distances through walls or under floors, which means buildup goes unnoticed until the dryer starts taking twice as long to finish a load. See Dryer Vent Cleaning in Inglewood for the full breakdown.
Chimney Repair in Inglewood
Chimney repair in Inglewood is usually a water story. The marine air, the dry season, the occasional winter rain, and chimneys that are 70 to 100 years old all combine to let moisture into places it shouldn’t go. Cracked crowns let rain straight down into the flue. Missing caps invite birds and debris. Clay tile liners spall and flake, and the firebox below starts showing water stains. We handle everything from cap replacement to full liner work, and the same crew that sweeps the chimney is the crew that repairs it. That’s the point of being a true chimney specialist rather than a sweep that finds problems and then refers you elsewhere. Learn more about the scope of our Chimney Repair capabilities.
Chimney Cap Installation
Signs you need it
Birds in the flue, water on the firebox floor, or a visible gap where a cap should be are all signs an Inglewood chimney needs one installed.
What it costs in Inglewood
In Inglewood, you should expect to budget a few hundred dollars for a professional cap installation depending on flue size and roof access.
How we do it
We measure the flue opening, select a stainless or copper cap sized correctly, and mechanically secure it so wind and birds can’t dislodge it.
Chimney Cap Replacement
Signs you need it
A cap that’s rusted through, missing its mesh, or no longer seated on the flue tile is a cap that’s not doing its job.
What it costs in Inglewood
Replacement in Inglewood runs in the same few-hundred-dollar range as a new install, plus a little more if the old cap has damaged the flue tile around it.
How we do it
We pull the old cap, inspect the flue opening for damage, and set a replacement cap mechanically rather than with adhesive that fails in UV and heat.
Chimney Liner Installation
Signs you need it
Spalling clay tile, gaps between tile sections, or a chimney that drafts poorly even after a sweep all point to liner failure in Inglewood’s older chimneys.
What it costs in Inglewood
A new stainless liner system in Inglewood typically runs in the low thousands, with the exact figure depending on flue height, roof access, and whether the old tile liner needs to be removed first.
How we do it
We specify a DuraFlex stainless system sized to the flue, run it through the existing chimney, insulate where the code requires, and connect it to the appliance collar properly.
Chimney Flashing Repair
Signs you need it
Water staining on the ceiling near the chimney, damp drywall around the firebox, or visible lifting where flashing meets the roofline in a steep Inglewood roof are all flashing problems.
What it costs in Inglewood
Flashing repair in Inglewood usually ranges from a few hundred dollars for a reseal up to more involved work if the flashing itself has rusted through and needs replacement.
How we do it
We inspect the existing flashing, determine whether it needs resealing or replacement, and use the right material for the roof type so the repair lasts.
Chimney Crown Repair
Signs you need it
Cracks across the crown surface, missing chunks of mortar, or a crown that doesn’t overhang the brick and direct water away are typical Inglewood findings.
What it costs in Inglewood
Crown repair in Inglewood generally runs a few hundred to over a thousand dollars depending on whether the crown can be resurfaced or needs to be torn down and repoured.
How we do it
We either resurface the existing crown with a proper crown-coat or form and pour a new crown with a drip edge that keeps water off the brick face.
What Chimney Repair Costs in Inglewood
| Item | Typical range in Inglewood |
|---|---|
| Chimney cap installation or replacement | $300 – $700 |
| Chimney flashing repair | $400 – $1,200 |
| Chimney liner installation (stainless, DuraFlex) | $2,800 – $6,500 |
How long does chimney repair take in Inglewood?
A simple cap or flashing job is usually done in one visit. A full liner install takes most of a day, and complicated flashing or crown work on steep Inglewood roofs can stretch into a second visit depending on access.
Do I need a permit for chimney repair in Inglewood?
Most repairs like caps, crowns, and flashing don’t require a permit in Inglewood, but liner installation can depending on scope. We’ll tell you what applies to your project before work begins. Call (833) 593-4907 and we’ll outline exactly what your job involves.
Brands We Service in Inglewood
We specify and install the same brands professional chimney contractors rely on: DuraFlex, HeatShield, Copperfield, and more. We stock common parts locally so a cap replacement or flashing repair doesn’t sit waiting on a shipment. See our brands for the full product line.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Inglewood, CA
| Service | Typical range in Inglewood |
|---|---|
| Chimney sweep (standard, single flue) | $180 – $340 |
| Chimney sweep with inspection report | $250 – $450 |
| Dryer vent cleaning | $120 – $250 |
| Chimney cap installation or replacement | $300 – $700 |
| Chimney flashing repair | $400 – $1,200 |
| Chimney crown repair | $500 – $1,500 |
| Chimney liner installation (stainless, DuraFlex) | $2,800 – $6,500 |
| HeatShield flue resurfacing | $1,800 – $4,200 |
Roof access and chimney height push prices up in Inglewood more than creosote does. Steep Spanish-revival rooflines, second-story chimneys, and tight property setbacks around the older neighborhoods can all add labor. We give an upfront price before any work starts, so the number doesn’t move after we arrive.
Neighborhoods We Serve in Inglewood
We work throughout Inglewood, from the 90302 and 90303 neighborhoods around downtown and the Forum up through 90304 and 90305. Most of our Inglewood jobs are scheduled within a week, with some flexibility for larger liner or crown work.
- Downtown Inglewood
- Inglewood Knolls
- Morningside Park
- North Inglewood
- Crenshaw-Imperial
Service Area – Cities Near Inglewood
We also serve the surrounding South Bay and South Los Angeles communities. Many Inglewood homeowners find us from nearby cities, and we regularly work in Hawthorne, CA, Gardena, CA, Redondo Beach, CA, and South Gate, CA. If you’re anywhere in the area, give us a call and we’ll tell you whether we cover your street.
Serving Inglewood, CA – Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Inglewood
We cover all four Inglewood ZIP codes: 90302, 90303, 90304, and 90305. Our service area extends through neighboring South Bay and South LA cities as well, so the easiest way to know is to call and ask.
Most routine sweeps and cap or flashing repairs are scheduled within a week. Larger liner installations and flue resurfacing jobs take longer to schedule because they’re full-day projects.
Most repair work doesn’t require a permit in Inglewood, but some HOAs in the area have rules about visible exterior work like caps. Call (833) 593-4907 with your street address and we’ll help you sort out what applies.
If you’ve been staring at a chimney that needs attention, or you’re just not sure when it was last cleaned, call us at (833) 593-4907 for a free estimate. We’ll give you a straight answer about what it needs and what it costs.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Inglewood Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Lucia Rodriguez"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Neil Rao"No issues with the actual work. I did have to call twice to get the invoice emailed to me, which was mildly annoying. The repair itself has been fine."
- Yolanda Vargas